Automotive endoscopes have become a favorite non-destructive testing equipment for 4S shops and car owners. They can quickly find car faults without removing them. At present, auto endoscopes are mainly used to detect and diagnose car engines, cylinders, fuel pipes, engines, and mufflers. , Conveying system, differential, water tank, fuel tank, gear box wear, carbon deposits, blockage, etc., and learn more about the problems that automotive endoscopes solve in maintenance and repair.
1. Piston and spark plug carbon deposit inspection
The carbon deposit inspection can be judged by "disintegration", that is, disassembling the car engine or observing the feedback voltage change, but these two methods have relatively high professional requirements; while using the car endoscope to check the car engine, through the spark plug hole or fuel injection Nozzle, you can directly observe various faults inside the cylinder.
2. Engine cylinder detection
Ordinary inspection of the cylinder requires the disassembly of the entire engine, which is time-consuming and labor-intensive. Now it is possible to detect the internal conditions of the cylinder in real time without disassembling the engine. The car endoscope is used to detect the inside of the cylinder. The lens is directly inserted into the cylinder, and the internal conditions of the cylinder can be sensed on the screen through the lens, and the conditions in other parts of the engine can also be observed.
3. Detection of engine exhaust catalyst
4. Inner wall of exhaust pipe
The car endoscope inspects the inner wall of the exhaust pipe, and it can be seen that there are tiny welding holes in the exhaust pipe wall.
5. Cylinder head inspection
In addition, automotive endoscopes can also be applied to gearbox inspection, water tank, fuel tank inspection, fuel injection hole inspection, etc.
6. Auto parts inspection
Detect whether there are cracks, pigmentation, etc. inside the auto parts, the tested hole is bent, and the smallest diameter is 4MM. Normal inspection cannot be directly observed.
7. Inspection of automobile castings
The inspection of automobile castings is mainly to check the impurities and trachoma inside the product.
In addition, automotive endoscopes can also be used for gearbox inspection, water tank, fuel tank inspection, fuel injection hole inspection, etc.
With the automotive endoscope, work intensity can be reduced and work efficiency improved. Colleagues greatly reduce repair time and cost, and avoid damage caused by multiple disassembly and assembly of mechanical parts.
